Preserving, Refinishing, and Installing Hardwood Flooring since 1980.

Red Oak

Quercus spp.

Shown below with water-based finish (top),
and oil-based finish (bottom)

red oak

 

APPEARANCE

Color: Heartwood and sapwood are similar, with sapwood lighter in color; most pieces have a reddish tone. Slightly redder than White Oak.
Grain: Open, slightly coarser (more porous) than White Oak. Plainsawn boards have a plumed or flared grain appearance; riftsawn has a tighter grain pattern, low figuring; quartersawn has a flake pattern, sometimes called tiger rays or butterflies.
Species & Grade Variations: More than 200 subspecies in North America; great variation in color and grain, depending on the origin of the wood and corresponding differences in growing seasons. Northern, Southern and Appalachian Red Oak can all be divided into upland and lowland species. Because they grow more slowly, upland species generally have a more uniform grain pattern than lowland species, with more growth rings per inch.

PROPERTIES

Hardness (Janka): Northern 1290 (benchmark).
Dimensional Stability: Average (change coefficient .00369).
Durability: Stiff and dense; resists wear, with high shock resistance, though less durable than White Oak.

 

WORKABILITY

Sawing / Machining: Above average in all machining operations except shaping.
Sanding: Sands satisfactorily, better than White Oak.
Nailing: Good resistance to splitting; excellent holding ability.
Finishing: Strong stain contrast because of large pores.
Comments: Red Oak generally works better than White Oak for bleached floors, because it is more porous and accepts bleach better, and because tannins in White Oak can discolor floor.

COST

(Relative to plainsawn select Red Oak.)
Multiplier: 1.00 (plainsawn)
1.30 (quartersawn)
1.65 (riftsawn)

AVAILABILITY

Commodity item, available in all types, styles and sizes of flooring, including parquet, strip, plank and veneer, both unfinished and prefinished.

Back to Wood Species